2D/3D CAD Profile Library & Procurement Specs
Equip your structural layout engineers and QA/QC inspectors with official CAD blocks, dimensional cross-sections, and raw material verification check lists.
1. 2D/3D CAD Component Drawing Catalog
Click formats below to download drawing models directly. Compatible with AutoCAD, SolidWorks, and STAAD.Pro.
Standard Mid Clamp (M8)
| Material: | Aluminium AA6063-T6 |
| Unit Weight: | 0.065 kg |
| Dimensions: | 50mm x 38mm x 35/40mm |
Standard End Clamp (M8)
| Material: | Aluminium AA6063-T6 |
| Unit Weight: | 0.058 kg |
| Dimensions: | 45mm x 38mm x 35/40mm |
Aluminium Mini Rail (AA6005-T5)
| Material: | Aluminium AA6005-T5 |
| Unit Weight: | 0.180 kg |
| Dimensions: | 120mm length x 41mm height |
Slotted Strut Channel (41x41)
| Material: | HDG Steel IS 2062 E250 |
| Unit Weight: | 2.050 kg/m |
| Dimensions: | 41mm x 41mm x 2.0mm thickness |
Universal L-Feet Bracket
| Material: | Aluminium AA6005-T5 |
| Unit Weight: | 0.092 kg |
| Dimensions: | 80mm height x 40mm width |
Standing Seam Roof Clamp
| Material: | Aluminium AA6005-T5 |
| Unit Weight: | 0.142 kg |
| Dimensions: | 45mm block width x 48mm height |
2. B2B Sourcing Guides & Procurement Assets
Checklists, specifications, and certified sample documents to assist procurement managers and quality auditors.
B2B Solar Racking Procurement Specification Checklist
A comprehensive PDF checklist for checking dimensional tolerances, galvanization coating weights, and fastener grades during raw material arrival inspection.
Mill Test Certificate (MTC) Sample Pack
Certified MTC sheets from primary steel mills proving chemical carbon limits (<0.20%) and physical yield values (>250 MPa) for our raw structural plates.
Fastener Torque & Bolt-Tension Specs Chart
Engineering chart specifying recommended tightening torque limits (Nm) for M8, M10, and M12 SS304 fasteners to avoid thread galling on site.
BIS Wind Load (IS 875) Compliance Checklist
Verification checklist detailing design wind speed calculation steps, importance factor adjustments, and structural deflection checks for auditing.